Effective Fire Damage Restoration Procedures

Restoration of the fire and damaged property smoldering to its original condition before the loss. Due to the destruction caused by fire, cleaning and restoration may take months or even weeks. Restoration after a fire involves property boards demolition and reconstruction over the rubble and smell and soot removal, washing of the interior of the property, and elimination of any potential risks such as lead and asbestos.

How to Restore a Fire Damage

Before entering the site to assess the extent of the fire damage, the repair company you hire for fire damage must first obtain authorization from an authorized body. An unlicensed contractor may be in an unsafe situation and risk injury.

Here’s how the restoration process typically progresses following they are allowed to access the property:

Damage Assessment

A fire damage specialist will assess the damage caused by the fire and subsequent water intrusions after confirming it is secure to get into the structure. It is usually determined how far fire and smoke penetrated the structure and the extent of any cleaning. The process also involves analyzing the contents of the building to determine what items should be taken out and which can be repaired.

After a thorough evaluation, The restoration firm will have a clearer idea of the project’s scope and the time needed to complete it and can estimate the cost.

Property Security and Debris Removal

Following the inspection after the assessment, the property needs to be secured. This means putting up an enclosure around the property, cleaning areas, closing the holes in the structure, and covering or tarping off sections on top. Suppose the fire didn’t impact specific areas on the property. In this scenario, fire and smoke damage restoration experts must ensure that the zone is kept separate from the affected area to avoid cross-contamination.

Water Mitigation, Demolition, and Dry Out

At this point, the aim is to eliminate the water and dry the building to stop further growth of corrosion or mold damage. Personal belongings are removed from the interior of the building. If required, damaged flooring, drywall, and other materials will be removed to studs. The water removal crews like Northport restoration will employ machines for commercial use to dry the structure. Roof tarps are used during this time to stop further water intrusion. 

Cleaning and Smoke Elimination

Cleaning is the longest element of a fire restoration project. It usually involves lots of manual labor to effectively remove smoke and soot off the interior and outside surfaces. In most cases, each square inch of the affected space must be scrubbed. After a thorough clean, the deodorizing agent eliminates the lingering smoke smells.

If water damage restoration was also performed, sanitizing or applying antimicrobial chemicals may be required to avoid mold growth. The contents that are removed will likely be restored to their pre-loss state. Cleaning is also about removing any smoke, soot, or other debris built up within the vents. Visit their home page for more information about damage restoration.

Construction & Restoration

The final step to bring the property back to its pre-loss condition is to fix any damage caused by fire or rebuild areas damaged by fire. For example, in the initial fire inspection, some structure elements might be unsalvageable and need to be removed and replaced. This could include the reconstruction and the roofing and electrical wiring, drywall flooring, countertops for the interior, and fixtures and fixtures to return the property to its previous state before the loss.